Grow Lights

Posts Tagged ‘hydroponics’

Generating between 65 to 115 lumens of light per each watt of consumed electricity, metal halide grow light lamps are considered to have high efficiency. MH lights produce light, which is very close to the natural sunlight with the rich blue spectrum. Due to this, MH lamps support vegetative growing in the most desired way – when plants have many leaves on the stem with short internodes.

Structurally, metal halide lamp is a vacuum glass tube. There is also an arc tube inside, filled with mercury and other metals in iodine form. Under the influence of electric current, those metals start to generate light and heat intensively. Though metal halide bulbs can be either transparent or coated with phosphorus, the first type is more preferred for the indoor gardening, since it produces very bright light.

There are different sizes of metal halide lamps, starting from 70watts and finishing with 1500 watts. However 250w, 400w and 1000w are modifications, most commonly used in hydroponics systems gardening. In order to make MH light to work, it is necessary to use a ballast, designed for a particular bulb size. Ballast is, in fact, a transformer, which decreases voltage to some predefined amount.

The lamps can work only in the positions they were designed for. Those marked with BU or BD should be used only in vertical position; while those lamps, which carry HOR sign, are for horizontal application. Besides, there are also universal (U) lamps, which can operate in either position. 

There are also many different styles of metal halide lamps available on the market today. Along with typical or regular MH bulbs, there are also Super Bulbs, which can produce up to 10-12% more light than ordinary bulbs.

Regular metal halide bulbs should be replaced after about 18 months or 9500-10000 hours of use. Super bulbs are less durable and should be replaced more frequently – approximately after 12 months or 6500 hours of use. These recommendations apply if grow lights will work 18 hours daily.

 

Along with water, hydroponics plant nutrients, CO2 and oxygen, grow lights is the key basic component, required by plants to live. Providing additional light is necessary for indoor gardening. Furthermore, light should resemble the sunlight as much as possible. The major concern with other types of lights is that they do not produce light in the appropriate spectrum, required by plants.

Being the most efficient bulbs, HPS bulbs are commonly used by gardeners. Producing light in red and yellow spectrum, light generated by high pressure sodium lamps resembles the natural sunlight during autumn. Due to this peculiarity, HPS light is the best for promoting plants blooming. However, some plants may react negatively to this type of light, growing with oblong stem, etc. To address that issue, new HPS bulbs with color correction have been developed. For example, Son Argo feature properly balanced light spectrum, which suits perfectly for the needs of indoor gardening.

High pressure sodium grow lamps are made of a semi-transparent ceramic arc tube, filled with a mixture of sodium, mercury, and xenon. The arc tube is placed into the protective outer glass shield, similarly to metal halide bulbs. The power ranges of HPS bulbs vary from 35w to 1000w, while the most popular are 250w, 400w, 600w and 1000w.

HPS bulbs are more durable in comparison with MH bulbs: they can be replaced once every 24 months. Though HPS grow lights lose their brightness slowly, in order to keep the brightness at the steady level, it is still recommended to replace the bulb within the specified period.

Among the brand new types of grow lights are sulfur lights, which are said to feature extremely high brightness and effectiveness. However, these bulbs are still rare on the market in view of the high price, so it is early to evaluate their practical value for those gardeners, for whom indoor hydroponics growing remains a hobby.

One can enjoy hydroponics gardening any season of the year, but it is especially rewarding during the cold and dark winter days. Being a type of indoor gardening, this system implies growing of plants in a special growing medium, supplied with nutrient solution, instead of soil. Similarly to other indoor gardening methods, with hydroponics gardening it is necessary to use grow lights, which allow plants to grow, make food and reproduce themselves through flowers or fruits. For this purpose HID lights are commonly used. There are several types of HID or high-intensity discharge lights: for example, metal halide grow lights and HPS grow lights. Every HID light requires digital ballast, which is necessary in order to control electrical current within the lamp, and thus provide its seamless functioning. Supplying light with a reflector is highly recommended as well, since it allows pointing the light in proper direction and increasing the light, produced by the bulb itself. Other type of grow lights are cost-effective and lightweight LED lights, where light-emitting diodes are used to produce light in colors beneficial for keeping up plant growth. The use of any of these lamps is highly effective for hydroponics growing.

Metal halide lamps contain aluminum arc tube, filled with argon, mercury and a variety of specific metals. It is a set of different metals that provide a particular color of the light, produced by the lamp. The argon gas works to start a lamp, when electric current is introduced at the electrodes on either end inside the arc tube. Under the effect of electric current mercury and metals start to vaporize and the light is produced. The key benefit of these lamps is that being small in size they produce a significant amount of light.

HPS grow lights, also known as high-pressure sodium lights, also have an aluminum arc tube inside, similarly to metal halide lights. However, the filling of the tubes is different: in case of HPS there are sodium, mercury, and the Xenon gas inside. Both metal halide lights and HPS lights require ballast for stabilizing electric current and providing smooth performance.

LED grow lights are small, but work very efficiently providing a lot of bright light. In general, they are similar to the lights, used for decorating Christmas tree. The light is produced when electric current moves between the two crystals inside a diode, which works as semi-conductor. Furthermore, LED grow lights usually have a reflector and a lens to direct the light where it is needed.

 Along with being cost effective and energy saving, there are multiple different color spectrums to choose among in order to suit specific plants needs in the best way. So, irrespectively to what type of grow light you choose, it will work accurately and provide effective growth of your indoor plants.  

Grow Light Reflectors

Often neglected as to their importance, grow light reflectors play a major role in a good indoor hydroponic garden system. Light plays a great role or the most important role in photosynthesis. The use of grow light reflectors in your garden enhances light distribution and ensures uniform distribution. Discounts on quality grow light reflectors are easily available and a super cost effective way of improving your personal garden productivity and efficiency. With effective planning, the use of the right lighting system together with grow light reflectors greatly expands your garden area.

Size and shape are important factors when considering the right grow light reflector. Grow lights and their configuration and personal preference for the amount of light needed to grow your plants are taken into consideration. Horizontal placement of the lights and reflectors are effective ways of mounting this system. Garden size also determines what shape and size of grow light reflector to be used. Smaller grow light reflectors produce higher intensity light beams because of their shorter travel distance.

 Air-Cooled Reflectors

 For additional ventilation and heat control, air-cooled reflectors are used. Indispensable for those gardens cramped in small spaces because of the amount of heat generated by grow lights. It maybe difficult or close to impossible to maintain proper ventilation in such enclosed garden by the use of external fans. Usual setup for indoor hydroponic gardens includes grow lights with air-cooled reflective hoods covered by glass heat shields. This allows the light source to be placed closer to the plant canopy ensuring better light penetration. Gardens with no special cooling requirements also gains to benefit from its installation. This is the ideal setup of an indoor hydroponic garden system; investing a little more provides maximum garden performance and enjoyment for gardeners and hobbyists.

thinkin 400 watt mh and hps lights. what brand, what light color, where do i get them? 6 plants

Along with water,  hydroponics plant nutrients, Co2 and oxygen, grow lights is the key basic component, required by plants to live. Providing additional light is necessary for indoor gardening. Furthermore, light should resemble the sunlight as much as possible. In order to achieve that goal several types of lights are used: incandescent, fluorescent, high intensity discharge or HID lamps and sulfur lights. While there are many other types of lighting, only the mentioned above are recommended for indoor gardening. The major concern with other types of lights is that they do not produce light in the appropriate spectrum, required by plants.

Though typical widely used incandescent lamps fit any ordinary light socket, this type of lighting is considered to be the least effective in lighting your garden in comparison with other types of lighting. Incandescent lights produce light in the red spectrum; that is why such lamps are commonly covered with a blue coating in order to increase the amount of blue spectrum in the produced light. In general, incandescent lights are considered to be poor options for indoor gardening needs.

In comparison with incandescent lamps, fluorescent lights produce more light with lower energy consumption. However, the light, produced by fluorescent lamps, is not intensive enough and cannot penetrate more than 6” – 8”. Light, produced by fluorescent lamps, is usually simply insufficient to provide normal growing of plants, vegetables and flowers. The only application, where it is possible to use fluorescent light, is growing seedlings, cuttings, or some particular plants with low light requirements, such as orchids.

High intensity discharge lights, also known as HID lights, are currently the most effective lights for indoor gardening. Metal halide (MH) and high pressure sodium (HPS) grow lamps are two major types of HID lights. Each type produces light in a particular range: for example, metal halide lights generate blue spectrum light similar to the full summer sun, and high pressure sodium lights produce light in red and yellow spectrum, resembling the autumn sunlight. 

Though high pressure sodium lamps usually are more expensive (by about 10%-20%) than metal halide lamps, they are more durable with extended lifecycle. Besides, HPS lights feature higher lumen output (97-150 lumens per watt consumed) and lose only about 5% of their brightness after one year of use (for comparison, MH bulbs produce about 70-115 lumens per watt and  lose up to 15-20% of their initial brightness within a year). 

Irrespectively to the particular type of lighting in use, it is recommended to replace lights on the timely manner: MH bulbs – after 12-18 months, and HPS bulbs – after 24 months of work. Basically, metal halide lamps is the more preferred type of lighting for plants, when they grow, and high pressure sodium lamps suit best for flowering plants. However, the discussion on which type of lighting is best is still open among gardeners. Each type of lights offers its own advantages, as well as disadvantages, so it is often a matter of personal choice, preferences, growing environment and needs. The scope of this article is to provide plain information on the available types of lighting for indoor hydroponic gardening, while leaving readers enough space for personal decisions on which product to prefer.  By the way, recently a new type of lights appeared. The so-called conversion systems allow switching between MH and HPS lights when it is necessary simply by changing the bulb. Though this type of lighting offers certain benefits, conversion systems are still pretty expensive. More information on particular types of HID grow lights used in hydroponics systems will be provided in the next set of hydroponics guides.

Plants use light to convert it into energy during the process, called photosynthesis. Growth of the plant is directly dependant on the amount of light received. By the way, the amount and type of light depend on the particular plant and its stage of development. So, a good grow lamp is the one, which is chosen in accordance with the light requirements of the particular plant.

Light is essential for health of your indoor plants, but choosing a proper grow light may be challenging and always requires thorough considerations. Grow light fluorescent offers the benefits of high effectiveness, no heat generation and full spectrum of light. For comparison, incandescent bulbs also produce a lot of light, but at the same time they generate a lot of heat, which is not always beneficial for indoor plants.

Each stage of plant development requires a particular light. When the plant is in its growing stage during which stem, branches and leaves develop, it is the best timing to use metal halide lamps for they produce blue spectrum light. However, when plant forms flowers and fruits, it is better to use high-pressure sodium or HPS lamps, which provide red light spectrum. 

The only downside of MH and LPS lights is the heat generated by them. Heat is not good for plants and soil. To prevent overheating, special cooling fans may be required.

 diodes or LEDs, introduced in early 1920s, have debuted in hydroponic gardening as grow lights only recently. In comparison to metal vapor lights, LED lights offer a lot of benefits with the initial cost being their only disadvantage. However, these grow lights are more cost-effective in the long run, having the average life time of about 100 000 hours vs. 15 000 hours of other lights. Besides, LED lights consume less energy, providing energy saving up to 80% in comparison to fluorescents and metal vapor lamps. Furthermore, LED lights do not generate heat, and, therefore, they need no additional cooling and ventilation.

 In order to increase plant growth and productivity it may be necessary to use certain additional accessories, such as reflectors, which help to increase light intensity and make it more balanced, eliminating any “hot spots”.

 Another key component of the grow light system is ballast, which provides energy. While fluorescent light fixtures have built-in ballasts, the other types of grow lights, namely metal vapor and LED lights require remote or external ballasts. Digital ballasts are important components, so it’s better not to save money on them. It is recommended to choose domestically produced digital ballasts instead of old magnetic coil types or those imported from China. In addition to being more reliable, expensive digital ballasts are equipped with additional features, such as short circuit or defective bulb detection.

 Hydroponic gardening belongs to the most common techniques to grow plants and flowers with no land required. While building hydroponic system, sooner or later one faces the necessity to invest in high quality grow lights. A lot of people give their preferences to HID (high intensity discharge) lights equipped with digital ballast. These types of lamps provide the most natural light similar to sunlight, which is especially important for successful indoor plants growing. However, there are certain differences between HID lamps worthy to know.

 In general, five types of HID lights exist. They are mercury vapor, xenon short-arc lamps, metal halide, low-pressure sodium and high-pressure sodium lights. Among these metal halide and high-pressure sodium lights are the most preferred types.

A great indoor garden requires a good grow light. It could mean the difference between success and failure. Having the right hydroponic light is the single-most important and costly decision in setting up your garden.

 Hydroponic grow lights come in three main types:

 

Incandescent lights

These are the usual lights found in homes. They are generally a poor choice for garden grown lights because of their limited light spectrum and inefficiency.

HID (High Intensity Discharge) grow lights

Producing more light (up to 10x more lumens/watt than an incandescent light),are more efficient. Drawbacks would be, they produce more heat, generally more expensive than incandescent lights and requires the additional expense and maintenance with ballast. It takes around 100 hours before hydroponic HID grow lights reach their optimum working conditions, or until they reach light intensity and color stability. 

Natural Sunlight

Expense for acquiring artificial lights can be skipped by using sunlight. This is done with the use of solar room, greenhouse or large windows which allows plenty of sunlight. Or you can do this outdoors; hydroponics does not necessarily mean the cultivation of plants indoors but it growing plants without the use of soil.

Basic setup for an indoor garden is 1000w of lighting for and area of 16-25 square feet of plant area. Reflectors and/or light movers should also be considered as they improve efficiency of the indoor hydroponic gardening system. Ballast may also be needed as numerous hydroponic grow lighting require igniting.

 Some Basic Facts

Before plugging in your grow light

Different plants require different levels or types of lighting, this paragraph would deal on some simple know-how on how to make an effective lighting setup. In setting up your garden, it is essential that you determine your growing area in order to determine the best lighting setup for you. Light is an essential factor in the growth of plants, it is important that the lighting solution you chose for your garden is adequate for its size. A poor or ill advised decision would certainly reflect on the quality of plants you produced. Inappropriate budgeting like cost cutting specially on lighting would just prove to be uneconomical and inefficient in the long run.

A general rule for lighting that area coverage is determined by a light wattage output. Reflectors might be used to increase the light area and reach corners but effectiveness is still determined by this formula.

Day and Night Cycles

The type of plant and its stage of growth generally determine the amount of light needed. A common cycle is that with 18 hours of light and 6 hours of darkness which is recommended for its vegetative growth phase.

For seedlings, a continuous light source is needed until the first real leaves appear. When the leaves appear, the regular 18/6 light cycle is used. Fluorescent or incandescent lights are best for seedling because of the low heat and soft light they generate. Automated timers maybe used to ensure consistent light cycles. Inexpensive timers are also available; this can be found any hardware or Home Depot/ Lowe’s type store.

Light and Photosynthesis

The plants exposure to light intensity, duration and light color directly affects the amount of energy needed for photosynthesis. The color of the light, Blue simulates the summer sun, Orange for autumn seem to stimulate photosynthesis best. The light spectrum produced by metal halide bulbs (Blue lights) and high pressure sodium bulbs (red/ orange lights) produce this effects. HID grow lights produce these effects owing to their popularity to hobbyist and professionals. Combination of metal halide and high pressure sodium bulbs provides the complete spectrum of light produced by the sun.

Use Caution When Working with Lights

The combination of water, electricity and chemicals in such a closed-in space makes the grow room one of the most dangerous places in your house. Keep in mind to separate your ballast by elevating it from the water-containing areas of your hydroponic growing system. 

Hydroponics, for those of you that may not know, is a system that allows gardeners to grow plants by using water as a substitute for soil. This new system is great for a number of reasons: increased plant yield, reduced growing time, etc. The only thing that is lacking up until this point is an adequate grow light. The options are numerous and it is up to every plant grower to decide which technology is most suitable for his specific needs. Most grow light systems that are used in regular gardens can also be used in hydroponics gardens. Hydroponics as a new type of farming is becoming more and more popular amongst gardeners.

With the help of grow lights gardeners can now use virtually any space to set up a hydroponics garden. Because new grow light technologies have emerged it is now also more profitable to have a hydroponics garden because with LED grow lights users can now save a lot of power. There are numerous other options apart from the LED grow light system, such as incandescent grow lights, fluorescent grow light systems, HID (high intensity discharge) grow light systems, and numerous other. Each of these systems has a category of users it is best suitable for. Fluorescent grow light systems, for example, are most suitable for cuttings and seeds, while incandescent lamps are utilized by people that take hydroponics as a hobby because of the low costs and decent results.

For farmers which view hydroponics as a business the regular way to go would be HID (high intensity discharge) grow lights. These grow lights can vary in power from 100 watts to 1000 watts, depending on the needs of a specific garden. From an environmental point of view, and retaining the most growth for your dollar, the best possible option when it comes to choosing a grow light system for your hydroponics garden, regardless if you view it as a hobby or as a business, is  LED grow lights. This system is unmatched neither in performances nor in operation costs by any of its competitors that are available today. Although they do prove to have higher acquisition costs than other technologies, LED grow light systems are immensely cheaper to operate when compared to the competition.

With a lifespan of over 100,000 hours of operating hours on average, LED grow light systems last over 50 times more than other grow light systems. Also, those passionate about taking care of the environment should know that LED grow light systems as opposed to, fluorescent grow lights for example, do not contain mercury or any other harmful chemicals and are completely safe to dispose of. With significantly lower power consumption and a greater light emission efficiency, LED grow light systems have proven to be the most efficient grow light systems for the hydroponics sector.

It’s a well known fact that hydroponics gardening requires grow lights. Choosing a powerful grow lamp to light the plants properly in order for photosynthesis to occur and for the plants to grow and thrive is the key to success. Lighting is crucial to every kind of indoor gardening situation, because without adequate light, the plants will be stunted and not grow to their full potential. LED grow lights can be used to good effect in an indoor plant growing situation.

LED refers to light-emitting diode. A diode has two terminals, and it allows current to flow in one direction and not in another. It is a simple semiconductor.

Photons are units of light. Atoms contain photons, and it is the photons that produce light. They produce light when electrons move around and change positions. Electrical current, in an LED lamp, flows across the diode, and when this happens, it causes a change in the movement of the electrons. The positively-charged electrons will move in the opposite direction from the negatively-charged electrons. A semiconductor is made more conductive to electrical flow when free electrons are added to the conductor material, creating negatively charged areas, or when they are taken away, leaving gaps in the chain, and positively charged areas. Electrical current flows over these areas, and it causes the electrons to move. The side effect of all this movement is the production of light.

The color of the light emitted by these types of grow lamps is based on the size of the gap in the electron chain. The gap size affects the frequency of the photon, and this is why it has an impact on the color of the light produced. Low-frequency light produced by an LED light is used to light remote controls for one of many common examples, because it it infrared light.

If you are growing plants indoors, then the color of the light that your grow light emits is quite vital to your plants’ health. Young plants at the seedling stage require blue light in order to grow properly. Mature plants, such as a flowering or fruiting plants, require red and orange light in order to get the plants to produce the flowers and fruit that you want. All of this is dependent on the light that you use with your plants. LED lamps come in a wide variety of colors, so it is easy to get the exact grow lamps you need in order to get the results you want from your indoor plants.

The advantage to using LED lights is that they do not get hot as they are in operation, and they also do not have a filament, which you find in incandescent light bulbs, so they often have a longer productive life because of this.